Show all

CONSTRUCTION OF 2,000 LITRES CAPACITY WATER RE-SERVOIR

5,000

ATTENTION:

BEFORE YOU READ THE CHAPTER ONE/ABSTRACT OF THE PROJECT TOPIC BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

 

INFORMATION:

YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000 ONLY.

THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08137701720

 

 

CONSTRUCTION OF 2,000 LITRES CAPACITY WATER RE-SERVOIR

 

ABSTRACT

 

In the construct of 2,000 litres capacity water reservoir galvanized  steel  sheet forms the tank and an angle iron rod forms the stand.  Two full length galvanized sheet were marked out and cut out to the required sizes.  The work stated by cutting the it gauges galvanized steel sheets of full length into geometrical dimensions of the cylindrical shape

 

After cutting, the different of the sized were assembled and joined together by using 12- guage  electrode on are holding machine.  The complete  holding of the parts with the exist piping were ensured.

 

The top of the tank has a circular shape opening for the entering of water which is covered with the constructed over.  in order to provide rigid foundation two angled iron was cast and assembled together which is the constructed support base.

 

The 2,00 litres capacity water reservoir is designed for effective storage  and transfer of water through the tap control which allow the easy flow of water through the tank

 

TABLE OF CONTENTS

 

Introduction (Chapter one)

 

Literature review (Chapter two)

 

Construction Method (Chapter three)

 

Conclusion and Recommendation (Chapter four)

 

References.

 

CHAPTER ONE

 

INTRODUCTION

 

Reservoir are ponds or lakes built for the storage of water usually by the construction of a dam across river.  The size of reservoir needed is a function the water demands, the natural flows of the rive impounded and the extent of droughts to be removed

 

In areas of moderate rainfall storage may be required during only few days or weeks in a year.  In and or semi and areas, storage capacity may be needed to supplement low stream flow over period of many months even years.  In some instance water can be divided by gravity flow or by pumping from one river to a reservoir on another stream.  Water supplies can be taken be from the reservoir directly or water may be released from the reservoir to augment river flows past a water supply intake downstream.

 

Water which is an example of a fluid can occur as underground water and surface water and surface water.  And fluid can be described as any substances which consist of  particle that move freely among themselves and yield to slightest pressure which can be inform of a or liquid but must not be a solid, rigid  o stable substance the volume of the groundwater greatly exceeds that of all fresh water lakes and reservoir combined.  In region where the land surface is hilly or some relief, a surface source of water can be developed by damming a river or large stream or by sculpturing a reservoir out of lowlands that receive regular run off.

 

While in surface water, stream supply most of the water needs of the united status, lakes, ponds, swamps and mashes, the reservoir represent stored steam flow.

 

Water or finds are stored for preservation, transferable and accessible purposes.  In areas where water is usually scarce and not regular, this makes it absolutely necessary that tanks or storage facilities should be the type that would not change the nature of the water or fluid.

 

Generally, the storage of water was achieved by the indication of constructional materials for storage.  The material could be plastics, metallic, ceramics and others. HOW TO GET THE FULL PROJECT WORK

 

PLEASE, print the following instructions and information if you will like to order/buy our complete written material(s).

 

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#5,000) into our bank Account below, send the following information to 08137701720

(1)    Your project topics

(2)     Email Address

(3)     Payment Name

(4)    Teller Number

We will send your material(s) after we receive bank alert

 

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

 

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 2023350498

Bank: UBA.

 

 

NOTE:

YOU CAN ALSO MAKE A TRANSFER PAYMENT

 

FOR MORE INFORMATION, CALL:

08137701720

 

AFFILIATE LINKS:

www.easyprojectmaterials.com

www.easyprojectmaterials.net.ng

www.easyprojectsmaterials.net.ng

www.easyprojectsmaterial.net.ng

www.easyprojectmaterial.net.ng

www.academia.edu