Show all

EFFECT OF CO-EXTRUDED FILM ON THE SHELF STABILITY OF SLICED SALTED PORK MEAT PRODUC

5,000

ATTENTION:

BEFORE YOU READ THE CHAPTER ONE OF THE PROJECT TOPIC BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

 

INFORMATION:

YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953, 08168759420

 

 

EFFECT OF CO-EXTRUDED FILM ON THE SHELF STABILITY OF SLICED SALTED PORK MEAT PRODUCT

 

ABSTRACT

The study evaluated the efficiency of co-extruded polypropylene (PP) and low density polyethylene

(LDPE) in extending the shelf-stability of unam inung traditional meat product during storage under

ambient conditions. Fresh pork was processed, in traditional way, into unam inung meat product and stored for 6 months, under ambient room conditions as unpackaged, clay pot packaged (traditional method), and those packaged in polypropylene (PP), low density polyethylene (LDPE) and co-extruded polypropylene/low density polyethylene (PP/LDPE). Samples were withdrawn at intervals of one month for evaluation of quality changes. Results show that the storage room temperature (25.95-27.91oC) and relative humidity (68.25-77.42%) are suggestive of typical diurnal conditions during the beginning of rainy season in South Eastern States of Nigeria. Relative humidity (RH) which was 69.55% at the beginning of storage reduced to 68.29% in the 2nd month of storage and subsequently increased thereafter to 77.42% in the 5th month of storage. Due to increasing RH from the second month of storage, all products increased in moisture content, consequently leading to increases in water activity and reduction in crude protein, fat and salt content due to dilution effect resulting from mass action. These changes were greater in the unpackaged and clay pot packaged samples due to greater access to air and moisture but least in the PP/LDPE coextruded film due to greater restriction to air and moisture transmission. Owing to increasing moisture and water activity from the second month of storage, protein hydrolysis became the dominant protein deteriorative reaction, leading to increases in protein solubility and pH, particularly in the unpackaged but significantly least in the PP/LDPE co-extruded plastic film. Thiobarbituric acid reactive substances (TBARS) and free fatty acids (FFA) results suggest that both oxidative and hydrolytic rancidity were occurring in the samples but the extent was very low and did not lead to detectable rancidity in any sample.

 

The reactions of the antioxidant vitamins (A,C and E) must have been effective

in preventing detectable rancidity, as they all have significant (p<0.05) correlations {r(Vitamin

C/TBARS) = -0.743, r(Vitamin C/FFA) = -0.586, r(Vitamin A/TBARS) = -0.882, r(Vitamin A/FFA) = – 0.794, r(Vitamin E/TBARS) = -0.753 and r(Vitamin E/FFA) = -0.831}. All the vitamins continued to reduce during storage. Total viable count and mould count significantly (p<0.05) increased in the

unpackaged samples throughout storage period presumably due to greater access to moisture and air.

These counts reduced in the plastic film packages, particularly PP/LDPE package, probably due to

restricted/lower availability of oxygen and moisture. Although all the sensory attributes slightly reduced during storage, the reductions did not lead to significant loss of acceptability. All deteriorative reactions/changes were more adverse in the unpackaged samples and clay pot packaged samples compared co-extruded PP/LDPE packaged samples. Thus, unam inung packaged with co-extruded PP/LDPE plastic film is acceptable up to 6 months of storage at ambient room conditions without much loss in quality. On the other hand, the unpackaged and clay pot packaged samples showed much instability and spoilage that they were discarded after about 3 and 5 months respectively.

TABLE OF CONTENT:

 

CHAPTER ONE

INTRODUCTION

1.1     Background of the Study

1.2     Statement of the Research Problem

1.3     Objectives of the Study

1.4     Significance of the Study

1.5     Research Questions

1.6     Research Hypothesis

1.7     Conceptual and Operational Definition

1.8     Assumptions

1.9     Limitations of the Study

 

CHAPTER TWO

LITERATURE REVIEW

2.1     Sources of Literature

2.2     The Review

2.3     Summary of Literature Review

 

CHAPTER THREE

RESEARCH METHODOLOGY

3.1     Research Method

3.2     Research Design

3.3     Research Sample

3.4     Measuring Instrument

3.5     Data Collection

3.6     Data Analysis

3.7     Expected Result

CHAPTER FOUR

DATA ANALYSIS AND RESULTS

4.1     Data Analysis

4.2     Results

4.3     Discussion

CHAPTER FIVE

SUMMARY AND RECOMMENDATIONS

5.1     Summary

5.2     Recommendations for Further Study

References

HOW TO GET THE FULL PROJECT WORK

 

PLEASE, print the following instructions and information if you will like to order/buy our complete written material(s).

 

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#5,000) into our bank Account below, send the following information to

08068231953 or 08168759420

 

(1)    Your project topics

(2)     Email Address

(3)     Payment Name (If you made a transfer)

(4)    Teller Number (If you made a direct deposit)

 

We will send your material(s) after we receive bank alert

 

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

 

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 2023350498

Bank: UBA.

 

 

 

FOR MORE INFORMATION, CALL:

08068231953 or 08168759420

 

 

Our other research websites:

http://easyprojectmaterials.com.ng/

http://easyprojectmaterials.com/

http://myeasyproject.com.ng/

http://projectmaterials.com.ng/

http://easyprojectmaterials.net.ng/

http://easyprojectmaterial.net.ng/

http://easyprojectsmaterial.net.ng/

http://easyprojectsmaterials.net.ng/

https://googleprojectsng.blogspot.com/

https://15projectz.blogspot.com/

https://myprojectsng.blogspot.com/

https://projectchaptersng.blogspot.com/

https://academicprojectworld.blogspot.com/

https://projectsng.blogspot.com/

https://projectfilesng.blogspot.com/

https://projectmaterialng.blogspot.com/

https://projectdevelopersng.blogspot.com/

https://projetsoft.blogspot.com/

https://projectdeveloperng.blogspot.com/

https://projectchapters.blogspot.com/

https://afrilibz.blogspot.com/

https://360research.blogspot.com/

https://myprojectmaterialsng.blogspot.com/