Show all

INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) DEPLOYMENT IN ARCHITECTURAL FIRMS IN NIGERIA

5,000

ATTENTION:

BEFORE YOU READ THE CHAPTER ONE/ABSTRACT OF THE PROJECT TOPIC BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

 

INFORMATION:

YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000 ONLY.

THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08137701720

 

 

INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) DEPLOYMENT IN ARCHITECTURAL FIRMS IN NIGERIA

 

 

ABSTRACT

 

Architectural practice has been in existence in Nigeria for more than fifty years and the

earliest introduction of computers by firms  for  operations began in the early 1980s.

Information and communication technology (ICT)  usage is inevitable in all fields  of

endeavours and for professionals in the present era. The study of ICT usage and deployment

therefore becomes imperative. This study aims at providing an understanding of the deployment of  ICT in architectural firms in Nigeria. It specifically examines organizational

and ICT characteristics of the firms; the measure of fit between ICT tools deployed and tasks

engaged; the effect of training programmes on  the availability of  ICT proficient personnel; and  the level of acceptance of Computer Supported Collaborative Work (CSCW) in

architectural firms in Nigeria. The Task-Technology Fit model (TTF) and an Extended

Technology Acceptance Model (TAM) were  employed to test deployment of four design

technologies (AutoCAD, ArchiCAD, Revit Architecture and SketchUp) and the acceptance

of CSCW. The multistage sampling technique was used to derive the sample drawn from six

cities: Abuja, Kaduna, Maiduguri, Enugu, Lagos and Portharcourt were selected  based on

documented evidence of having the largest number of firms in their zones. A  total of 118

questionnaires were returned from a total of 159 distributed. This represents a 74.21% return

rate. The data collected were analysed using descriptive statistics, crosstabulations, Chi-

Square tests, exploratory factor analysis,  Analysis of Variance (ANOVA)  and multiple

regression analysis. The study revealed  improvements in the quality and availability of ICT

systems in architectural firms in Nigeria as from 2001.  Internet connectivity and Website

ownership is on the increase in architectural firms. Annual turnover of the architectural firms

has is positively correlated to  the quality of installed systems. The study also found a

relationship between ownership of websites and the date of ICT introduction. The integrated

TTF/TAM test showed levels of fit between tasks engaged in architectural firms and the

design technologies deployed. The model tests explain between  41.4%  –  52.1% of the

residual variation in the production of detailed system product. The  coefficients of

determination  and beta  coefficients  are significant to predict  model  fit  of  deployment.

Reasonable proficiency levels of the staff in the deployment of the available software and

technologies were confirmed. Furthermore firms are getting increasingly involved in

outsourcing as a service delivery strategy. The study revealed that few firms fund training

programmes within their organizations. Most of those that fund training programs commit

lower than a million naira to it annually. The study revealed that there is no  significant

relationship  between the availability of CAD/BIM proficient staff and the existence of

training programmes within the firms. It was also confirmed that there was no  significant

relationship between the availability of CAD/BIM proficient staff  and the training methods

employed by the firms. It was found that there was a  significant  relationship  between the

availability of CAD/BIM proficient staff and the CAD/BIM proficient staff needed.  The

interview responses suggest that the schools of architecture have done much towards

achieving  the availability of CAD/BIM proficient staff. CSCW has been adopted by only

37.3% of the firms and the study revealed that perceived ease-of-use, security and the quality

of installed systems were predictors of the extended TAM model.  In conclusion, the study

recommends  that concerted efforts towards developing network infrastructure especially

broadband access can  improve the practice of outsourcing and also have impact on CSCW.

Quality investment and commitment by technology companies and vendors, firms, the

government and other stakeholders in the area of ICT acquisitions, network security and the

development of user-friendly technologies will surely improve adoption and deployment of

ICT in architectural firms in Nigeria.

TABLE OF CONTENTS

Title Page    ……………………………………………………………………………………………..i

Declaration    …………………………………………………………………………………………….ii

Certification    ……………………………………………………………………………………………iii

Dedication    ……………………………………………………………………………………………iv

Acknowledgements   …………………………………………………………………………………………….v

Abstract    …………………………………………………………………………………………….vi

Table of Contents  …………………………………………………………………………………………….vii

List of Tables    …………………………………………………………………………………………….xiii

List of Figures    …………………………………………………………………………………………….xv

List of Plates    …………………………………………………………………………………………….xvii

 

Chapter One: Introduction

1.1  Background to the Study………………………………………………………………………………..1

1.2  Statement of the Problem………………………………………………………………………………..3

1.3  Aim and Objectives ……………………………………………………………………………………….5

1.4  Research Hypothesis ……………………………………………………………………………………..5

1.5  Justification of the Research …………………………………………………………………………..6

1.6  Research Design…………………………………………………………………………………………….7

1.7  Scope of Study ……………………………………………………………………………………………..8

1.8  Limitation of Study………………………………………………………………………………………..8

1.9  Key Definitions and Concepts…………………………………………………………………………9

1.10  Summary ……………………………………………………………………………………………………..11

 

Chapter Two: Review of Literature

 

2.1  Introduction …………………………………………………………………………………………………12

2.2  Architecture and the Architect………………………………………………………………………..12

2.3  Scope of Architectural services ………………………………………………………………………14

2.3.1  Scope of Services …………………………………………………………………….p; 2.3.2  Normal Architectural Service: The Three Stages ……………………………………15

2.4  Architectural Practice in Nigeria ……………………………………………………………………..16

2.4.1  Architecture and Regulatory Institutions in Nigeria ………………………………..18

2.5  Historical Account from CAD to BIM ……………………………………………………………..19

2.5.1  The Advent and Development of the Computer ………………………………………19

2.5.2  Evolution and Development of CAD, CAAD and Graphic Packages………….20

2.5.3  Evolution of Communication Systems……………………………………………………22

2.6  The Real and the Virtual …………………………………………………………………………………23

2.7  ICT Applications in Architectural Firms …………………………………………………………..24

2.7.1   Areas of Applications of ICT in Architectural Firms…………………………………24

2.8  ICT Adoption and Deployment ………………………………………………………………………..25

2.8.1  General Administrative Application ………………………………………………………26

2.8.2  Core Architectural Applications …………………………………………………………….27

2.8.3   Computer Aided Design (2D and 3D CAD) …………………………………………..27

2.8.4   CAAD as Distinct from CAD ………………………………………………………………30

2.8.5   Digital Object Library (DOL) ………………………………………………………………30

2.8.6   Design and Virtual Modelling ………………………………………………………………30

2.8.7   Animations and Simulations ………………………………………………………………..32

2.8.8  5D Modelling………………………………………………………………………………………32

2.9  BIM and Its Significance to Architectural services………………………………………………33

2.9.1  Challenges of BIM Solutions…………………………………………………………………34

2.10  Web-Based Deployment………………………………………………………………………………….35

2.11  Human Resource for CAD, CAAD and BIM……………………………………………………..38

2.11.1  Outsourcing…………………………………………………………………………………………40

2.11.2  Training………………………………………………………………………………………………42

2.12  Hardware and System Requirements…………………………………………………………………44

2.13  Challenges of ICT Deployment in Nigerian Firms………………………………………………45

2.13.1 Security……………………………………………………………………………………………….46

2.13.2  Availability…………………………………………………………………………………………47

2.13.3  Accessibility……………………………………………………………………………………….48

2.13.4  Affordability………………………………………………………………………………………48

2.14  Productivity Gains from ICT Deployment…………………………………………………………49

2.15  Summary of Chapter……………………………………………………………………………………….50

 

Chapter Three: Theoretical/Conceptual Framework

 

3.1  Introduction ……………………………………………………………………………………………….52

3.2  Research Approaches and perspectives in the Study of ICT in Organizations………52

3.2.1  The positivist Perspective…………………………………………………………………..52

3.2.2  The Interpretive Perspective……………………………………………………………….54

3.2.3  The Critical Perspective……………………………………………………………………..54

3.3  Theoretical Framework for the Study  …………………………………………………………….55

3.4  Technology Acceptance Model (TAM)…………………………………………………………..55

3.5  Task-Technology Fit (TTF) Model………………………………………………………………..57

3.6  Summary of Chapter…………………………………………………………………………………….60

 

Chapter Four: Research Methodoloour: Research Methodology

4.1  Introduction…………………………………………………………………………………………………61

4.2  Research Design…………………………………………………………………………………………..61

4.3  Research Population……………………………………………………………………………………..62

4.4  Subjects………………………………………………………………………………………………………62

4.5  The Sampling Frame…………………………………………………………………………………….62

4.6  Sampling Technique……………………………………………………………………………………..65

4.7  Sample Size ………………………………………………………………………………………………..66

4.8  Pilot Study…………………………………………………………………………………………………..69

4.9  Method of Data Collection……………………………………………………………………………..69

4.9.1 Questionnaire/Interview Design……………………………………………………………..70

4.9.2 Data Collection and Treatment……………………………………………………………….70

4.9.3 Field Work Details………………………………………………………………………………..77

4.11  Summary …………………………………………………………………………………………………….78

 

Chapter Five: Organization and Information and Communication Technology

Characteristics of Architectural Firms

5.1  Introduction…………………………………………………………………………………………………80

5.2  Period of Establishment of Firms…………………………………………………………………….80

5.3  Date of ICT Introduction……………………………………………………………………………….81

5.4  Number of Branches Operated………………………………………………………………………..82

5.5  Annual Turnover of Firms………………………………………………………………………………83

5.6  ICT Characteristics of Architectural Firms……………………………………………………….85

5.6.1 Availability of Websites…………………………………………………………………………85

5.6.2 Number of Available Workstations………………………………………………………….86

5.6.3 Quality of Installed Systems……………………………………………………………………87

5.6.4 Operating System Used…………………………………………………………………………..87

5.6.5 Availability of Internet Connectivity…………………………………………………………88

5.6.6 Forms of Internet Connectivity…………………………………………………………………89

5.6.7 Internet Service Providers (ISP)………………………………………………………………..89

5.6.8 Mode of Connectivity Deployed……………………………………………………………….90

5.7  Annual Turnover and Quality of Installed Systems……………………………………………..91

5.8  Website Availability and Date of ICT Introduction……………………………………………..94

5.9  Implications of Findings…………………………………………………………………………………..94

5.10  Summary……………………………………………………………………………………………………….95

 

Chapter Six: Task Technology Fit in the Deployment of Design Technologies in

Architectural Firms

6.1  Introduction……………………………………………………………………………………………….97

6.2  Task Significance in Architectural Firms………………………………………………………..97

6.3   Task Technology Fit Model………………………………………………………………………….99

6.4  Exploratory Factor Analysis (EFA) of TTF Constructs for Design Technologies…100

6.4.1  AutoCAD Deployment EFA………………………………………………………………101

6.4.2  ArchiCAD Deployment EFA……………………………………………………………..102

6.4.3  Revit Architecture Deployment EFA…………………………………………………..103

6.4.4  SketchUP Deployment EFA……………………………………………………………….104

6.5  Task-AutoCAD (TTF) Model………………………………………………………………………..105

6.5.1  Hypothesis Test…………………………………………………………………………………108

6.6  ArchiCAD TTF Models………………………………………………………………………………..111

6.6.1  Hypothesis Test…………………………………………………………………………………111

6.7  Revit (Architecture) TTF Models…………………………………………………………………..112

6.7.1  Hypothesis Test…………………………………………………………………………………113

6.8   SketchUp TTF Model…………………………………………………………………………………..114

6.8.1  Hypothesis Test…………………………………………………………………………………116

6.9  Implications of Findings………………………………………………………………………………..116

6.10  Summary…………………………………………………………………………………………………….118

 

Chapter Seven: Human Capital Availability and Capability of Architectural Firms

7.1  Introduction………………………………………………………………………………………………..120

7.2  Number of Staff in the Architectural Firms……………………………………………………..120

7.3  Staff with Architectural Training……………………………………………………………………121

7.4  Draughtsmen in Architectural Firms……………………………………………………………….122

7.5  CAD Literate Personnel………………………………………………………………………………..123

7.6  BIM Literate Personnel…………………………………………………………………………………123

7.7  Staff Proficiency Levels with Design Technologies………………………………………….123

7.7.1  Staff Proficiency Levels AutoCAD……………………………………………………..124

7.7.2  Staff Proficiency Levels ArchiCAD……………………………………………………..125

7.7.3  Staff Proficiency Levels Revit Architecture…………………………………………..126

7.7.4  Staff Proficiency Levels ” SketchUp…………………………………………………….127

7.7.5  Staff Levels of Proficiency in the deployment of the Internet…………………..128

7.7.6  Staff Proficiency Levels ” Autodesk Buzzsaw……………………………………….129

7.7.7  Staff Proficiency Levels ” Renderers…………………………………………………….130

7.7.8  Staff Proficiency Levels ” Other Software…………………………………………….131

7.8  Outsourcing in Architectural Firms………………………………………………………………….132

7.8.1   Adoption of Outsourcing……………………………………………………………………..133

7.8.2   Services Previously Outsourced……………………………………………………………133

7.8.3   Services Currently Outsourced……………………………………………………………..134

7.8.4   The Future: Services Considered for Outsourcing…………………………………..135

7.9.0  Existence of Staff Training Programmes………………………………………………………….136

7.10  Training Methods Employed…………………………………………………………………………..137

7.11  Funding for training programmes……………………………………………………………………138

7.12   Availability of CAD/BIM Proficient Staff and the Existence of

Training Programmes…………………………………………………………………………………….139

7.13   Availability of CAD/BIM Proficient Staff and CAD/BIM Staff Needed………….141

7.14  Availability of CAD /BIM proficient staff and Training Methods in

Architectural Firms……………………………………………………………………………………….142

7.15  Implications of Findings………………………………………………………………………………..144

7.16  Summary……………………………………………………………………………………………………..145

 

Chapter Eight: Acceptance of Computer Supported Collaborative Work in

Architectural Firms in Nigeria

8.1  Introduction…………………………………………………………………………………………………147

8.2  Adoption of CSCW in Architectural firms……………………………………………………….147

8.3  The Regression Analysis of the Extended TAM Model …………………………………….148

8.4   The Revised Extended TAM model…………………………………………………………………151

8.5  Implications of Findings…………………………………………………………………………………152

8.6  Summary……………………………………………………………………………………………………..152

 

 

Chapter Nine: Summary, Discussions and Conclusions

9.1  Introduction………………………………………………………………………………………………….153

9.2   Overview of the Study…………………………………………………………………………………..153

9.3   Summary of Findings…………………………………………………………………………………….156

9.4   Discussion…………………………………………………………………………………………………..158

9.5  Areas of Future Study……………………………………………………………………………………163

9.6  Contribution to Knowledge…………………………………………………………………………….163

9.7  Recommendations…………………………………………………………………………………………164

9.8  Conclusion……………………………………………………………………………………………………164

 

References……………………………………………………………………………………………………………..166

Appendices…………………………………………………………………………………………………………….178

 

 

LIST OF TABLES

Table 2.1  Report of the number of Architects, firms and firm/membership ratio…………19

Table 2.2  Major Design and Collaboration technologies and their Classification………..35

Table 4.1  Table showing the distribution of licensed architectural firms in the various

cities across the country (2004, 2006, 2008 and 2010)………………………………63

Table 4.2  Table showing the distribution of licensed architectural firms in the various

cities across the country with respect to geographical grouping (2008)……….64

Table 4.3  Table showing the sample of licensed architectural firms in the various

selected cities across the country…………………………………………………………….67

Table 4.4   Table showing the number, percentage of duly completed questionnaire and

overall response rate……………………………………………………………………………..69

Table 4.5  Definition of Variables………………………………………………………………………….74

Table 5.1   Correlation Matrix relating Seven Characteristics of Sampled

Architectural Firms ……………………………………………………………………………..84

Table 5.2   Annual turnover and quality of installed systems Cross tabulation……………..92

Table 5.3   Website Availability and Date of ICT Introduction Cross tabulation………….93

Table 6.1  Frequency of Tasks in Architectural Firms………………………………………………99

Table 6.2  Variables Extracted/Factor loadings for AutoCAD dataset………………………102

Table 6.3  Variables Extracted/Factor loadings for ArchiCAD dataset……………………..103

Table 6.4  Variables Extracted/Factor loadings for Revit Architecture dataset…………..104

Table 6.5  Variables Extracted/Factor loadings for SketchUP dataset……………………….105

Table 6.6  Model Summary for AutoCAD TTF/TAM Test……………………………………..107

Table 6.7  Model Summary for ArchiCAD  TTF/TAM Test……………………………………110

Table 6.8  Model Summary for Revit Architecture TTF………………………………………….115

Table 6.9  Model Summary for SketchUp TTF/TAM Test……………………………………..124

Table 7.1  Staff Mean Proficiency Levels in the Available ICT Tools………………………133

Table 7.2  Average Percentage of firms’ staff per Proficiency Level………………………..149

Table 8.1  Model Summary for CSCW TAM Test…………………………………………………143

 

LIST OF FIGURES

Figure 2.1  Operational Structure of AutoCAD Showing the Link between Graphic,

Numeric and Visual Data in the Production of a Complete CAD

Document……………………………………………………………………………………………29

Figure 2.2  Graphical Description of the relationship between the Internet, Extranet and

Intranet………………………………………………………………………………………………37

Figure 2.3  Personnel levels, Roles and relationships within an ICT driven Firm………….39

Figure 3.1  Technology Acceptance Model………………………………………………………………55

Figure 3.2  Extended Technology Acceptance Model………………………………………………..56

Figure 3.3  Task-Technology Fit Model…………………………………………………………………..57

Figure 3.4  Integrated TAM/TTF Model………………………………………………………………….58

Figure 3.5  Integrated TAM/TTF Model for the study showing the various constructs….59

Figure 4.1   Chart showing the distribution of Architectural firms in the sample…………..78

Figure 5.1  Architectural Firms’ Year of Establishment ……………………………………………81

Figure 5.2  Architectural Firms’ Date of ICT Introduction ……………………………………….82

Figure 5.3  Number of Branches Operated by Architectural Firms……………………………..83

Figure 5.4  Architectural Firms’ Annual Turnover……………………………………………………83

Figure 5.5  Availability of Websites by Architectural Firms………………………………………85

Figure 5.6  Number of Available Workstations in Architectural Firms………………………..86

Figure 5.7  Architectural Firms’ Quality of Installed Systems ……………………………………87

Figure 5.8  Operating System Utilized by Architectural Firms……………………………………88

Figure 5.9  Availability of Internet Connectivity in Architectural Firms………………………88

Figure 5.10  Forms of Connectivity Employed by Architectural Firms………………………….89

Figure 5.11  Mode of Connectivity Deployed by Architectural Firms……………………………91

Figure 5.12   Annual turnover and quality of installed systems……………………………………..93

Figure 5.13   Bar Chart showing Website Availability and Date of ICT Introduction……..94

Figure 6.1   Architectural Firms’ Percentage Usage of design software……………………..100

Figure 7.1   Number of Staff in the Architectural Firms……………………………………………121

Figure 7.2   Number of staff with architectural training in the firms………………………….122

Figure 7.3   Staff Level of Proficiency in the deployment of AutoCAD…………………….125

Figure 7.4   Staff Level of Proficiency in the deployment of ArchiCAD…………………….126

Figure 7.5   Staff Level of Proficiency in the deployment of Revit Architecture…………127

Figure 7.6   Staff Level of Proficiency in the deployment of SketchUP……………………..127

Figure 7.7   Staff Level of Proficiency in the deployment of Autodesk Buzzsaw………..129

Figure 7.8   Staff Level of Proficiency in the deployment of Renderers……………………..130

Figure 7.9   Staff Level of Proficiency in the deployment of other software……………….131

Figure 7.10  Percentage of firms Outsourcing Major Tasks………………………………………..135

Figure 7.11  Existence of Training Programmes in Architectural Firms……………………….136

Figure 7.12  Method of Training Programmes in Architectural Firms………………………….138

Figure 7.13  Funding for Training Programmes………………………………………………………..139

Figure 7.14  Availability of CAD/BIM Proficient Staff and CAD/BIM Staff Needed…..142

Figure 8.1  Adoption of CSCW by Architectural Firms……………………………………………148

Figure 8.2  Extended Technology Acceptance Model for the Acceptance/

Adoption of CSCW in Architectural Firms in Nigeria……………………………..151

 

LIST OF PLATES

Plate 1    A rendered AutoCAD view of a proposed State Assembly Complex…………27

Plate 2   A rendered AutoCAD view of a proposed State Assembly Complex………….28

Plate 3    A rendered Revit Architecture model ……………………………………………………33

Plate 4    An Architect designing on a desktop system in the firm’s studio……………..109

Plate 5    Arrangement of the Workstations in the Firm’s Studio…………………………..140

Plate 6    Accommodation for Six CAD/BIM Proficient Staff in the Firm’s Studio…143

 

HOW TO GET THE FULL PROJECT WORK

 

PLEASE, print the following instructions and information if you will like to order/buy our complete written material(s).

 

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#5,000) into our bank Account below, send the following information to 08137701720

(1)    Your project topics

(2)     Email Address

(3)     Payment Name

(4)    Teller Number

We will send your material(s) after we receive bank alert

 

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

 

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 2023350498

Bank: UBA.

 

 

NOTE:

YOU CAN ALSO MAKE A TRANSFER PAYMENT

 

FOR MORE INFORMATION, CALL:

08137701720

 

AFFILIATE LINKS:

www.easyprojectmaterials.com

www.easyprojectmaterials.net.ng

www.easyprojectsmaterials.net.ng

www.easyprojectsmaterial.net.ng

www.easyprojectmaterial.net.ng

www.academia.edu