Show all

MASTERS THESIS TOPICS AND MATERIALS IN MECHANICAL ENGINEERING

MASTERS THESIS TOPICS AND MATERIALS IN MECHANICAL ENGINEERING

 

 

 

ATTENTION:

BEFORE YOU READ THE THESIS TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

 

NOTE:

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED THESIS TOPIC TO ANY OF THESE NUMBERS-08068231953, 08168759420

 

 

NOTE ALSO:

WE CAN ALSO DEVELOP THE FULL THESIS WORK

CALL: 08068231953, 08168759420

 

 

 

MASTERS THESIS TOPICS AND MATERIALS IN MECHANICAL ENGINEERING

 

 

  1. Nonlinear Vibrations of a Single-walled Carbon Nanotube for Delivering of Nanoparticles
  2. Revisiting Free Transverse Vibration of Embedded Single-layer Graphene Sheets Acted Upon by an in-plane Magnetic Field
  3. The Cavitation Effect in Centrifugal Pumps
  4. Performance Of A Modified Vehicle Drive System In Generating Hydropower
  5. Transient Analysis And Performance Prediction Of Passive Cooling Of Buildings Using Long Wave Nocturnal Radiation In Owerri, Nigeria
  6. Synthesis And Characterization Of Biofuels From Various Nigerian Crops For Internal Combustion Engines
  7. Experimental Investigation Of Upflow Bioreactors With Central Substrate Dispenser
  8. Energy – Exergy Based Performance Analysis Of A Solid Adsorption Solar Refrigerator
  9. Development Of A Gas Propelled Rocket Engine
  10. Design Of A Robust Electronic Internal Temperature Controller For Petroleum Distillation Columns
  11. Design And Performance Evaluation Of A Parabolic Solar Cooker
  12. Comparative Analysis Of Renewable Energy Sources For Power Generation In Nigeria
  13. An Experimental Study On Different Types Of Alternative Fuels For Production Of Bricks On Vertical Shaft Kilns
  14. Study Of Internal Combustion Engines Waste Heat Recovery Using Turbocharger Compounding
  15. Performance Analysis For Kaplan Hydraulic Turbines In Jebel Aulia Dam
  16. Design, Simulation Of Solar Refrigator Of Adsorption Principle
  17. Modeling And Simulation For Kaplan Turbine In Roseires Power Plant
  18. Development Of Automobile Brake Linings Using Local Materials
  19. Design and Thermal analysis of ISRASAT1 Cube satellite structure
  20. Implementation of Denoising MEMS Accelerometer Using Wavelet Transformation
  21. Effect Of Annealing On The Hardness Of Cold Worked Al-6’1/Ocu Alloy
  22. Design And Implementation Of A Plc Basedautoma Tic Car Washing System
  23. A Computer Programme For The Economic Evaluation For Cogeneration Applications
  24. The Design And Devewpment Of Peddling Water Pumping Machine
  25. Fault Tolerance Analysis In Fuel Control System Using Simulink Software
  26. Development Of A Low Cost Biomass Briquetting Machine For Rural Communities.
  27. Water Pump Control Based On Microcontroller And Water Level Sensors
  28. Inhibition Evaluation Of Chemical And Plant Extracts On The Corrosion Of Metallic Alloys In Acidic Environment
  29. Formulation Of Powdered Alumina For Body Armour Application
  30. Planning Production And Inventory By Using Material Requirements Planning System Case Study: Wafrapharma Laboratories, Khartoum, Sudan
  31. The Development Of A Laboratory Fire-Tube Steam Boiler –
  32. Experimental Investigation Of Ethanol/Water Blend Injection On Emission Characteristics Of Diesel Engines
  33. Thermodynamic Performance Analysis Of Selected Gas Turbine Power Plants In Nigeria
  34. Composite Materials For Eco-Friendly Fire Retardant Building Ceilings For Tropical Region
  35. Fluid Dynamics Modelling Of The Impact Of Climate Change On Solar Radiation In Nigeria
  36. Simulation of Ejector Flow Behavior Which Produce Vacuum in Power Plants Condenser
  37. Inhibition Evaluation Of Chemical And Plant Extracts On The Corrosion Of Metallic Alloys In Acidic Environment
  38. Development Of A Spur Gear From Carburised Cast Iron For Application In Bottling Machine
  39. Development Of A Spur Gear From Carburised Cast Iron For Application In Bottling Machines
  40. Development Of A Pedal Powered Washing Machine
  41. Development Of A Low Cost Biomass Briquetting Machine For Rural Communities
  42. Design And Implementation Of A Mobile Surveillance Robot With Night Vision Camera
  43. Determination Of The Mechanical And Microstructural Properties Of An Armour Steel For High Impact Performance
  44. Heat And Mass Transfer Analysis Of Potato Drying In A Kerosene Heated Oven
  45. Analysis of Magnetic Torsional Vibration Damper for Reciprocating Internal Combustion Engines
  46. Design And Simulation Of a Multi Storey Smart Parking System
  47. Irrigation Monitoring And Control System Using Internet Of Things
  48. Conceptual Design of Performance Appraisal System for Industrial Enterprise (Case Study)
  49. Design and Analysis of a Microsatellite Structure in lowearth Orbit
  50. Performance of Electronic Governor and Embedded Systems for Locomotive Operation
  51. Methodological Approach of Performance Evaluation for Using Pump as Micro Hydro-turbine
  52. A Study of Cavitation in Pumps and Flow Systems
  53. Optimization Of Abrasive Water Jet Cutting Process Using Simulation
  54. Design and Implementation of a Robot for Road Pothole Detection Using GPS
  55. A Proposed Solution for the Erosive Wear Problem in Garri-4 Power Plant Sand Convoying System
  56. PLC Design Based On Monitoring Crude Oil Vessel
  57. Inhibition Effect Of Butan-1-Ol On The Pitting Corrosion Of Austenitic Stainless Steel (Type 304)
  58. Quantifying The Cost Of Unplanned Outage At Khartoum North Thermal Power Station
  59. Development Of Nanocrystalline Composite Coatings For Marine Application
  60. Advanced Engineering Materials: Key To Millennium Development Goals In Africa.
  61. Advanced Engineering Materials: Key To Millennium Development Goals In Africa
  62. Effect Of Injector Nozzle Holes On Diesel Engine Four Stroke Performance
  63. The Foundation And The Fundamental Pillar Of World Technological Civilization And Economic Development.
  64. Inhibitive Effect Of Ferrous Gluconate On The Electrochemical Corrosion Of Aluminium Alloy In H2SO4 Solution
  65. The Foundation And The Fundamental Pillar Of World Technological Civilization And Economic Development
  66. Effect Of Vortex In Kaplan Turbine-Using CFD A Case Study: Rosseries Power Plant
  67. CAD, Modeling And Simulation Of A Progreesive Die
  68. An Evaluation Of The Potentials Of Natural Gas In The Economic Development Of Nigeria
  69. An Investigation on Performance of a Horizontal Entrained Flow Gasifier
  70. Dynamic Modelling of a Vapour Compression Air Conditioner System
  71. Development of Local Technology for a Small-Scale Biochar Production Processes from Agricultural Wastes
  72. Activated Carbon from Agricultural Waste: Process Description and Economic Analysis
  73. Stress Effects on Microstructure and Failure Morphology of Low Carbon Steel Sheet
  74. Artificial Neural Network Predictive Modeling of Uncoated Carbide Tool Wear When Turning Nst 37.2 Steel
  75. The Development of CAD Software for Manufacturing Fiat-face and Roller Cam Systems
  76. A SURVEY ON THE ENERGY CONSUMPTION AND DEMAND IN A SCHOOL
  77. Development and Application of an Inflation-Based Productivity Model
  78. Assessment of Large-Scale Motion in Turbulent Boundary Layer Subjected to a Short Roughness Strip
  79. VEHICLE SPEED CONTROL USING ROAD BUMPS: PART 2
  80. Effects of Pipes Corrugated Shapes on the Friction Factor
  81. Exergetic Analysis Of Atmospheric Distillation Plant: A Case Study Of Wrpc Refinery
  82. Performance Analysis Of A Modified Pneumatic Separator For Cowpeas
  83. Fractal Characterization and [so-mapping of Parameter Plane of Harmonically Excited Pendulum
  84. CORROSION ANUYSIS OF NICKEL, AND GOLD PLATED CARBON STEEL ORNAMENTALS IN SULPHURIC ACID MEDIUM
  85. Development of A Batch Reactor For The Production Of A Activated Carbon From Coconut Shells
  86. Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel
  87. Duct Design and Performance: A Case Study of A University Senate Chamber
  88. Roller-Cam Systems Design: Development of a Profile Analysis Software
  89. Correlations for Nusselt Number in A Staggered Cross-Flow Tube-Type Heat Exchanger
  90. Computational model of intraluminal thrombus growth in abdominal aortic aneurysms with fibrin generation
  91. Two Contrasting Approaches to Auto-Ignition Modelling for HCCI Engines
  92. 25cc HCCI Engine Fueled with Diethyl Ether
  93. Blast loading of sandwich panels with thin-walled tube cores
  94. The effects of blast induced imperfections on the energy absorption characteristics of square tubes
  95. Modeling of Flow in Impeller Stirred Tanks using Computational Fluids Dynanlics
  96. Finite Element Algorithms For The Static And Dynamic Analysis Of Time-Dependent And Time-Independent Plastic Bodies
  97. Creep Predictions For Turbomachinery Components
  98. Coal Demand For Electricity Generation In South Africa – Analysis And Conditional Forecasts To The Year•2020
  99. Optimization of Turning Nst 37.2 Steel with Uncoated Carbide Cutting Tools
  100. Development And Application Of A Machine Vision System For Measurement Of Tool Wear
  101. Energy Benchmarking And Carbon Foot print Reduction Opportunities In Portland Cement Manufacturing Processes In Nigeria.
  102. Design Of An Efficient Solid Waste Management And Disposal Scheduling System: A Case Study Of Enugu Metropolis.
  103. Microstructure And Mechanical Properties Of Epoxy – Rice Husk Ash Composite
  104. A mathematical modelling of the intensity of contaminants (C02) on occupancy level of a space in continuous use
  105. Global Impact of Gas Flaring
  106. Energy Benchmarking And Carbon Footprint Reduction Opportunities In Portland Cement Manufacturing Processes In Nigeria.
  107. Effect of Antioxidants on the Performance Characteristic of A Diesel Engine Fuelled With Diesel And Jatropha Biodiesel Blends
  108. Enhancement of Vehicle’s Security System
  109. Improvement Of The Performance Of Thermal Power Systems Through Energy And Exergy Analysis
  110. Computational Fluid Dynamics (CFD) Modeling Of Turbulence Induced Drag In Vehicle Aerodynamics
  111. Performance Analysis Of A Model Pulverized Coal Combustion System
  112. Analysis Of An Automatic Control System For Online Blending Of Petrol With Corrosion Inhibitor In The Direct Continuous Electronic Fuel Injection Automobile Engine
  113. Determination Of The State Of Stress Between Adhesively Bonded Single Lap-Joints.
  114. Determination Of The State Of Stress Between Adhesively Bonded Single Lap-Joints.
  115. Inventory Programmes In A Manufacturing Industry
  116. Optimization Of Machining Parameters With Consideration Of Tool Adjustment In Turning Operations
  117. Fractal dimension and time factors of sawdust pattern formation in sawmills
  118. Design and Implementation of Building Management System using Internet of Things
  119. Biomass Gasification Using A Horizontal Entrained-Flow Gasifier And Catalytic Processing Of The Product Gas
  120. Correlation and Distribution Analyses of Estimated Fractal Dimensions and Hurst’s Exponent from Waveforms of Excited Nonlinear Pendulum
  121. Material Selection For An Engine Exhaust Of A Utva 75 Light Aircraft Using A Systematic Approach
  122. Modelling Of Linebreak In High-Pressure Gas Pipes
  123. The Effect of Full Annealing on the Micro-Structure and Mechanical Properties of Cold Drawn Carbon Steel
  124. Estimation of thermal contact resistance in metal-plastic interface of semi conducting electronic devices
  125. Mathematical Modeling of the Traffic Congestion Problem at a University Campus
  126. Linear Superposition of Symmetric IFS-Based Attractors and Fractal Characterization
  127. Designing a continuous quality improvement framework for improving electrowinning current efficiency.
  128. Biomass Gasification Using A Horizontal Entrained-Flow Gasifier And Catalytic Processing Of The Product Gas
  129. Low Turbulence Natural Convection In Triangular Enclosures
  130. Laminar Free Convective Heat Transfer In Parabolic Enclosures
  131. Analysis Of Dynamic Stress Propagation Of A Vibrating Subsea Structure In A Pressurized Environment
  132. Energy Benchmarking And Carbon Footprint Reduction Opportunities In Portland Cement Manufacturing Processes In Nigeria
  133. Design And Fabrication Of A Prototype Press Tool For The Manufacture Of An Item Of Cutlery
  134. Vertical Vibration of Rigid Bodies With Rectangular Bases on Elasic Media
  135. Seismic Vibration Due to Detonation in Oil Exploration
  136. Designing A Continuous Quality Improvement Framework For Improving Electrowinning Current Efficiency
  137. Synthesis And Characterization Of Biofuels From Various Nigerian Crops For Internal Combustion Engines
  138. Measurement methods for hydropower resources: a review
  139. Experimental Investigation Of Upflow Bioreactors With Central Substrate Dispenser
  140. ENERGY – Exergy Based Performance Analysis Of A Solid Adsorption Solar Refrigerator
  141. Carbon Monoxide Exposure During Cooking In Households: A Case Of Dar Es Salaam City, Tanzania
  142. Assessment of hydropower resources in Tanzania. A review article
  143. An Investigation on the Flow Characteristics in the Cross-Flow Turbine-T15 300
  144. A zonal model for radiation heat transfer in coal-fired boiler furnaces
  145. Development Of A Fixed Wing Unmanned Aerial Vehicle For Delivery
  146. Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures
  147. Design, Construction And Performance Evaluation Of A Commercial Ice Maker
  148. Intelligent Tool Condition Monitoring In High-Speed Turning Of Titanium Ti-6al-4v Alloy
  149. Stress Effects on Microstructure and Failure Morphology of Low Carbon Steel Sheet
  150. Investigating Duffing Oscillator using Bifurcation Diagrams
  151. Performance Assessment of Installed Solar PV System: A Case Study of Oke-Agunla in Nigeria
  152. CAD/CAM applications: status and impact in Nigerian industrial sector
  153. A Short Excursion Into Energy Supply Mix In Nigeria
  154. Modeling of solar energy potential in Africa using an artificial neural network
  155. Modelling energy expenditure of a brick layer at various postures
  156. Detection Of Tjb[Le Point Of Crack Mit.Tat1on Using Multi-Stage Random Sampling (Mrs] And Spatial Point Pattern (Spp)
  157. Development Ofa Computer Aided Software For Power Transmissionshaft Design .With Multiple ‘Criteria
  158. Accurate Safety Zone Determination During Gas Flaring
  159. Control of Chaotic Oscillation and Response Charaterisation in Duffing Oscillator Using Vibration Absorber
  160. The Effect of Tribological Processes on Productivity: A Case Study of Industries in Ibadan Metropolis of Nigeria
  161. Effect of Some Variables on The Carburization of a Locally Produced Steel
  162. Assessment of Household Energy Efficient In Ibadan, Nigeria
  163. Preliminary Evaluation of Guava (Psidium guajava L.) Tree Branches for Truss Fabrication in Nigeria
  164. The Development Of An Analyses-Intensive Software For Improved Cams System Design
  165. Electricity Production from Biomass in nigeria
  166. Design, Fabrication and Performance Evaluation of a Domestic Dish Washing Machine
  167. Influence of Cutting Parameters and Tool Wear on Acoustic Emission Signal in High-speed Turning of Ti-6Al-4V Alloy
  168. Impact Of Technology (Engineering) On Business Operations In Nlgeria (1960 – 1998)
  169. Performance Evaluation Of Uncoated Carbide Cutting Tools In Turning Nst
  170. Design Appreciation Of A Commercial Washing Machine
  171. Comparative Analysis of Analytical and Graphical Upperbound Solutions for 4-High Reversing Aluminium Cold –Rolling Sheet Mill
  172. Finite Element Modeling of Seismic Response of Field Fabricated Liquefied Natural Gas (LNG) Spherical Storage Vessels
  173. The Contribution Of Eutectic Y-Y’ Liquid Film To The Tmaz Microfissuring In Inertia Friction Welded Pm Rrloqo Superalloy
  174. Developlng A Dynamic Load-Trackiwg Learningsofware For Winch Lift Design
  175. Mechanical Properties of Cold-Drawn Low Carbon Steel for Nail Manufacture: Experimental Observation
  176. Artificial Neural Network Modeling of Heat Transfer in a Staggered Cross-flow Tube-type Heat Exchanger.
  177. Optimization of Production Down Time in Innoson Plastic Manufacturing Company
  178. Performance Ranking Of Artificial Neural Network Learning Algorithlvis In Solar Radiatio!\ Forecast
  179. Integrated process and control modelling of water recirculation in once-through boilers during low load and transient operation
  180. Moderation of Admission Standards in the Nigerian Polytechnics- An Alternative to Enhancing Quality of Graduates
  181. 3-D Geometric Modeling For Finite Element Analysis Using Matlab C Programming
  182. Application Of Average Positive Lvapunov In Estimation Of Chaotic Response Peak Excitation Frequency Of Harmonically Excited Pendulum
  183. Mathematical Modelling of the Road Bumps Using Laplace Transform
  184. Energy Auditing Of A Typical Residential Building In Ibadan Metropolis
  185. Development of Software Algorithm for Energy Modelling and Forecasting
  186. The Application Of Artificial Neural Networks To Mapping Of Wind Speed Profile For Energy Application In Nigeria
  187. Fractal Analysis Of Area-Perimeter Relationship Of Some Selected Countries Of The World
  188. Engineering Research For Self-Reliance Modeling And Simulation Perspective
  189. Modeling and Forecasting of Short-Term Half-Hourly Electric Load at the University of Ibadan, Nigeria.
  190. Developing a Local Capability for the Manufacture 9f Activated Carbon from Agricultural Waste.
  191. Frequency Analysis Of Numbers: Applications In Ergonomics And Diagnosis Of Computer Keyboard Faults
  192. Modeling Grain Structures of Some Carbon Steels using Voronoi Tesselation
  193. Energy Audit Of Timber Log Processing In Southwestern Nigeria
  194. Runge-Kutta Schemes Coefficients Simulation for Comparison and Visual Effects
  195. Finite Element Analysis of Von-Mises Stress Distribution in a Spherical Shell of Liquified Natural Gas (LNG) Pressure Vessels
  196. Performance Assessment of Installed Solar PV System: A Case Study of Oke-Agunla in Nigeria
  197. CAD/CAM applications: status and impact in Nigerian industrial sector
  198. A Short Excursion Into Energy Supply Mix In Nigeria
  199. Modeling of solar energy potential in Africa using an artificial neural network
  200. Modelling energy expenditure of a brick layer at various postures
  201. Detection Of Tjb[Le Point Of Crack Mit.Tat1on Using Multi-Stage Random Sampling (Mrs] And Spatial Point Pattern (Spp)
  202. Development Ofa Computer Aided Software For Power Transmissionshaft Design .With Multiple ‘Criteria
  203. Accurate Safety Zone Determination During Gas Flaring
  204. Control of Chaotic Oscillation and Response Charaterisation in Duffing Oscillator Using Vibration Absorber
  205. The Effect of Tribological Processes on Productivity: A Case Study of Industries in Ibadan Metropolis of Nigeria
  206. Effect of Some Variables on The Carburization of a Locally Produced Steel
  207. Assessment of Household Energy Efficient In Ibadan, Nigeria
  208. Preliminary Evaluation of Guava (Psidium guajava L.) Tree Branches for Truss Fabrication in Nigeria
  209. The Development Of An Analyses-Intensive Software For Improved Cams System Design
  210. Electricity Production from Biomass in nigeria
  211. Design, Fabrication and Performance Evaluation of a Domestic Dish Washing Machine
  212. Influence of Cutting Parameters and Tool Wear on Acoustic Emission Signal in High-speed Turning of Ti-6Al-4V Alloy
  213. Impact Of Technology (Engineering) On Business Operations In Nlgeria (1960 – 1998)
  214. Performance Evaluation Of Uncoated Carbide Cutting Tools In Turning Nst
  215. Design Appreciation Of A Commercial Washing Machine
  216. Comparative Analysis of Analytical and Graphical Upperbound Solutions for 4-High Reversing Aluminium Cold –Rolling Sheet Mill
  217. Finite Element Modeling of Seismic Response of Field Fabricated Liquefied Natural Gas (LNG) Spherical Storage Vessels
  218. The Contribution Of Eutectic Y-Y’ Liquid Film To The Tmaz Microfissuring In Inertia Friction Welded Pm Rrloqo Superalloy
  219. Developlng A Dynamic Load-Trackiwg Learningsofware For Winch Lift Design
  220. Mechanical Properties of Cold-Drawn Low Carbon Steel for Nail Manufacture: Experimental Observation
  221. Artificial Neural Network Modeling of Heat Transfer in a Staggered Cross-flow Tube-type Heat Exchanger.
  222. Optimization of Production Down Time in Innoson Plastic Manufacturing Company
  223. Performance Ranking Of Artificial Neural Network Learning Algorithlvis In Solar Radiatio!\ Forecast
  224. Integrated process and control modelling of water recirculation in once-through boilers during low load and transient operation
  225. Moderation of Admission Standards in the Nigerian Polytechnics- An Alternative to Enhancing Quality of Graduates
  226. Corrosion Behaviour of Nickel Plated Low Carbon Steel in Tomato Fluid
  227. Investigating Corrosion Characteristics of Electroplated Medium Carbon Steel in Sodium Carbonate Environment for Decorative Objects Applications
  228. Energy And Exergy Analyses Of Malt Drink Production In Nigeria
  229. Comparative Study of Corrosion Behaviour of Nickel and Gold Plated Carbon Steels Used as Ornamentals in Saline Environment
  230. Construction Of Iron-Constant An Thermocouple From Locally Available Haw Materials
  231. Artificial Neural Network Modeling For Al-Zn-Sn Sacrificial Anode Protection Of Low Carbon Steel In Saline Media
  232. An inflation-based maintenance profitability model
  233. Strengthening of Alloy Steel by High Temperature Thermomechanical Treatment
  234. COMPUTERISED APPROACH TO COOLING LOAD ESTIMATES FOR AIR -CONDITIONING DESIGN
  235. Energy Audit of Commercial Buildings (A Case Study of Global Fleet Oil Ltd. and National Mirror
  236. Development of a performance measurement system for manufacturing systems
  237. PERFORMANCE EVALUATION OF CORROSION INHIBITORS IN PIPELINES USING CANNON AMURICATA (CM) AND CASSUTTIDFILIFURMIS LEAF (CF) PLANT EXTRACTS
  238. Mechanical Characterization of Earth-Based Composites Materials Reinforced with Treated Bamboo Fibres for Affordable Housing
  239. Recycling of Plastic Waste Material: Mechanical Properties and Implications for Road Construction
  240. Fabrication of 3D Printed Scaffolds for Tissue Engineering: Understanding the Mechanical Stability, Degradation Mechanisms and Biocompatibility.
  241. DESIGN AND FABRICATION OF A SOLAR-POWERED ELECTRIC STOVE FOR RURAL AND URBAN COMMUNITIES OF GHANA
  242. Performance of a Parallel Hybrid Electric vehicle with Liquefied Natural Gas
  243. DESIGN OF A BIOMASS POWER PLANT FOR MAJOR COMMERCIAL CLUSTER IN IBADAN, NIGERIA
  244. A model for tracking temperature variation in cold and hot metal working conditions during machining operations
  245. Comparative Analysis of Simulation Time in Nonlinear and Harmonically Excited Pendulum and Duffing Oscillators
  246. Energy-Exergy Analysis and Carbon Emission of Nigerian Cement Manufacturing Industry
  247. VEHICLE SPEED CONTROL USING ROAD BUMPS
  248. THE CONSTRAINTS AND PROSPECTS OF SMALL SCALE BUSINESS ENTERPRISES IN NIGERIA
  249. STRESS LOOP EFFECTS IN DUCTILE FAILURE OF MILD STEEL
  250. SIMULATION AND OPTIMISATION OF A SOLAR-POWERED ADSORPTION ,REFRIGERATION MODULE
  251. REHABILITATION OF PUMPS: CASE STUDY OF UNIVERSAL PUMP SET
  252. PROSPECTS FOR SOFTWARE DEVELOPMENT FOR INDIGENOUS DESIGNS
  253. Minimization of Energy in Scrap Based Electric Are Furnace (EAF) Steel Making Through the Use of Premelter
  254. FINITE ELEMENT MODELING OF AN ALUMINIUM ALLOY AUTOMOBILE RIM UNDER STATIC LOAD
  255. ENVIRONMENTAL DEGRADATION AND MUNICIPAL SOLID WASTE MANAGEMENTS IN EKET NIGERIA
  256. ENERGY AND EXERGY ANALYSIS OF RAW MATERIAL PREPARATION IN A CEMENT PRODUCTION PLANT
  257. ENERGY ANALYSIS OF AN ORGANIC FERTILIZER PLANT IN IBADAN, NIGERIA
  258. EFFECTS OF CUTTING PARAMETERS ON SURFACE ROUGHNESS DURING HIGH SPEED TURNING OF Ti-6AI-4V ALLOY
  259. EFFECT OF ENERGY UTILIZATION ON ECONOMIC GROWTH IN NIGERIA
  260. EFFECT OF COLD DRAWN DEFORMATION ON MECHANICAL PROPERTIES OF LOW CARBON STEEL DUE TO CHANGES IN GRAIN SIZE
  261. DEVELOPMENT OF INDIGENOUS MANUFACTURING INFRASTRUCTURE IN NIGERIA: A CASE STUDY OF PACE-SETTER ORGANIC FERTILIZER PLANT
  262. DEVELOPMENT OF A FIELD-PORTABLE DIGITAL POTENTIOSTAT
  263. DEVELOPMENT AND EVALUATION OF FLUID MECHANICS LABORATORY CURRICULUM: A CASE STUDY OF THE UNIVERSITY OF IBADAN NIGERIA
  264. DESIGN CONSTRUCTION AND EVALUATION OF A LOW COST TRAY DRYER
  265. DESIGN AND SIMULATION ALGORITHM FOR CAM SYSTEM ANALYSIS
  266. Design and Construction of a 5kW Turbine for a proposed micro hydroelectric Power Plant Installation at Awba Dam University of Ibadan
  267. Constraints and Prospects of Research Capacity Building for Engineering Undergraduates in Nigerian Universities
  268. CHARATERIZATION OF FLUID FLOW USING RANDOM WALK DYNAMICS
  269. Laser Application of Nanocomposite Hydrogels on Cancer Cell Viability
  270. Assessing road construction: potential impact of constructing the KwabenyaKitase road on the local economy
  271. Recycling of plastic waste materials: mechanical properties and implications for road construction
  272. BUILD OF A LOW-COST PROTOTYPE ROV FOR SEARCH AND RESCUE
  273. WALL CLIMBING ROBOT: MODEL DESIGN, LOGIC CONTROL AND MODEL SIMULATION
  274. Application of Mathematical Programming Approach to Welding Flux Development
  275. A PC Based Simulation Package for Engineering Students and Professionals on Compressible Flow
  276. A Neuro Fuzzy Linguistics Approach in Optimizing the Flow Rate of a Plastic Extruder Process
  277. A CRITICAL REVIEW OF THE NIGERIAN ENERGY SCENARIO
  278. Stress Effects on Microstructure and Failure Morphology of Low Carbon Steel Sheet
  279. NEED-DRIVEN MANPOWER DEVELOPMENT FOR THE METALLURGICAL AND MATERIALS INDUSTRY BY ENGINEERING CURRICULUM RESTRUCTURING
  280. Multipurpose Machine For Sieving ”Ogi” Slurry
  281. THE APPLICATION OF DUFFING’S EQUATION IN PREDICTING THE EMISSION CHARACTERISTICS OF SAWDUST PARTKLES
  282. Finite Element Modeling of Heat Transfer in Salt Bath Furnaces
  283. DEVELOPMENT AND APPLICATION OF A MACHINE VISION SYSTEM FOR MEASUREMENT OF SURFACE ROUGHNESS
  284. Development of an Experimental Model Bubbling Fluidized Bed Combustor for Combustion of Biomass
  285. THE DEVELOPMENT AND EVALUATION OF A SOLAR-POWERED REFRIGERATOR USING ACTIVATED CARBON 1 METHANOL PAIR
  286. Preliminary Design of an Automated White Board Cleaner
  287. PREDICTION OF CENTRAL LOCATION OF THE STATE WITH IRREGULAR BOUNDARY
  288. Modeling of Tool Wear Parameters in High-Pressure Coolant Assisted Turning of Titanium Alloy Ti-6Al-4V Using Artificial Neural Networks.
  289. A Review of Porous Evaporative Cooling for the Preservation of Fruits and Vegetables
  290. Application of Neurofuzzy in the Development of Road Bump Designs
  291. THE ROLE OF MECHANICAL STIMULI ON BACTERIA GROWTH
  292. A NOVEL GRAPHIC PRESENTATION AND FRACTAL CHARACTERISATION OF POINCARE SOLUTIONS OF HARMONICALL Y EXCITED PENDULUM
  293. Numerical Simulation of Thermal Behavior of Buildings
  294. Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups
  295. Finite Element Modeling of Variable Membrane Thickness for Field Fabricated Spherical (LNG) Pressure Vessels
  296. Surface area determination of ragged metallic bodies
  297. AIRCRAFT DISASTERS – ROLES OF MATERIALS
  298. Activated carbon production from wastes: profitability index and product cost reduction method
  299. DEVELOPMENT AND PRELIMINARY PERFORMANCE EVALUATION OF A SOLAR COLLECTOR FOR ADSORPTION REFRIGERATOR
  300. Combustion of ‘As Received’ Palm Kernel Shell in a Bubbling Fluidized Bed Combustor
  301. Prototype Design and Test Analysis of a Beans Particle Seperating Machine
  302. Modelling of solar energy potential in Nigeria using an artificial neural network mode
  303. Application of hybrid structural interaction matrix to quality management
  304. ENERGY ANALYSIS FOR PRODUCTION OF POWDERED AND PELLETISED ORGANIC FERTILIZER IN NIGERIA
  305. THE DESIGN OF A LOWCOST AUTOMATIC GROUND VEHICLE FOR WAREHOUSE STOCK MANAGEMENT
  306. INTELLIGENT WIND TUNNEL DESIGN
  307. PRODUCTION OF CORRUGATED ROOFING SHEETS FROM EPOXY-BASED MATRIX REINFORCED WITH TREATED COIR FIBERS
  308. DESIGN AND FABRICATION OF AN INFLATABLE WING
  309. DESIGN AND ANALYSIS OF SAE MINI BAJA SUSPENSION SYSTEM
  310. DESIGN OF A WINDOW CLEANING ROBOT FOR HIGH RISE BUILDINGS
  311. DESIGN AND FABRICATION OF A SOLAR POWERED STIRLING ENGINE AS A WATER PUMPING MACHINE
  312. DESIGN AND FABRICATION OF A MULTIDECK GARI SIEVING MACHINE
  313. AN AUTOMATIC RETRACTABLE CLOTHES DRYING RACK
  314. FINITE ELEMENT MODELING OF STRESS DISTRIBUTION IN SPHERICAL LIQUIFIED NATURAL GAS (LNG) PRESSURE VESSELS
  315. Surface finish quality characterisation of machined workpieces using fractal analysis
  316. Slip Line Field Solution for Second Pass in Lubricated 4-High Reversing Cold Rolling Sheet Mill
  317. Effect of Moisture Content and Inner Drum Rotation Speed on the Shelling Performance of A Melon Sheller
  318. CORROSION BEHVIOUR OF ZINC PLATED 1018 STEEL IN TOMATO FLUID
  319. Finite Element Analysis of In-Plane Displacements and Von-Mises Stresses in Ellipsoidal and Circular Cylinderical Petroleum Tankers
  320. Quantitative characterisation of an engineering write-up using random walk analysis
  321. Energy and cost analysis of organic fertilizer production in Nigeria
  322. Comparative Analysis of Different Inocular Conditions on the Performance of a Bioreactor in the Treatment of Operationally Exhausted Metal Working Fluids (MWFs)
  323. Mathematical modelling of lead assimilation by printing press operators in a poor indoor air quality environment
  324. Artificial Neural Network Model for Prediction of Friction Factor in Pipe Flow
  325. TRENDS OF ENERGY INPUT IN SOME NIGERIAN PALMOIL MILLS
  326. Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel
  327. Corrosion Behavior of Nickel Plated Medium Carbon Steel in Cocoa Liquor
  328. Finite Element Analysis of Von-Mises Stress Distribution in a Spherical Shell of Liquified Natural Gas (LNG) Pressure Vessels
  329. Performance Evaluation of a Locally Fabricated Crusher (Hammer Mill)
  330. Investigation of Excited Duffing’s Oscillator Using Versions of Second Order Runge-Kutta Methods
  331. Effect of Particle Size on Combustion of Coconut Shell in a Bubbling Fluidized Bed Combustor
  332. Prediction of Friction Losses in Spark Ignition Engine: An Artificial Neural Networks Approach
  333. DESIGN AND CONSTRUCTION OF A PLASTIC MELTING POT FOR LOW DENSITY POLYETHYLENE (LDPE)
  334. Energy-cost analysis of alternative sources to electricity in Nigeria
  335. Effect of Silicon Content and Shake-Out Time on Hardness and Grain Size Properties of GL 250 Cast Irons
  336. Modelling and Forecasting Periodic Electric Load for a Metropolitan City in Nigeria
  337. Energy and Exergy Analysis of a Vegetable Oil Refinery
  338. Developing Archetypal Machines for a Sequence of FoodSlurry Processing Operations: An Overview
  339. Finite Element Modeling of Low Heat Conducting Building Bricks
  340. Modelling the association between in vitro gas production and chemical composition of some lesser known tropical browse forages using artificial neural network
  341. The application of fractal box dimensions in predicting the emission characteristics of colliding sawdust particles for sustainable sawmilling
  342. Occupational Lead Exposure in Printing Presses: An Analytical Approach
  343. Modelling the correlation between cutting and process parameters in high-speed machining of Inconel 718 alloy using an artificial neural network
  344. Chaos Diagram of Harmonically Excited Vibration Absorber Control Duffing’s Oscillator
  345. Corrosion Behavior of 18/8 Stainless Steel and Nickel-Plated Low Carbon Steel in Cassava Fluid
  346. Simulation and Lyapunov’s Exponents Characterisation of Lorenz .and Rosler Dynamics
  347. THERMODYNAMIC ANALYSIS AND SIMULATION OF COMBINED ADSORPTION HEATING AND COOLING SYSTEM
  348. Fractal dynamics of a bouncing ball on accelerating lift tabletop with both constrained to vertical motion
  349. Effect of Heat Treatment on Mechanical Properties and Microstructure of NST 37-2 Steel
  350. Aluminium Anode Activation Research – A Review
  351. Comparative Study of Corrosion Behaviour of Nickel and Gold Plated Carbon Steels Used as Ornamentals in Saline Environment
  352. CERAMIC ENGINES:MATERIAL PROPERTIES FOR HIGHER PERFORMANCE
  353. PROPILE SJMULATION SOFTWARE FOR TRIGONOMETRIC AND POLYNOMIAL CAMS DESIGN
  354. Characterization and [so-mapping of Parameter Plane of Harmonically Excited Pendulum
  355. PERFORMANCE ANALYSIS OF A MODIFIED PNEUMATIC SEPARATOR FOR COWPEAS
  356. ASSESSMENT OF THE MAINTENANCE PRACTICES OF MECHANICAL ENGINEERING WORKSHOPS IN THE SISSALA EAST DISTRICT OF THE UPPER WEST REGION OF GHANA
  357. INVESTIGATING THE PERFORMANCE OF RURAL AND URBAN PETTY TRADERS IN AFIGYA-KWABRE DISTRICT
  358. A Pioneering Addition to Household Appliances – LPG Refrigerator
  359. Extrusion cooking on pasting properties and relative viscosity of selected starch crops
  360. Evaluation of a Small Hydro/Photovoltaic Hybrid System Potential for Electricity Generation for Federal University of Technology, Owerri
  361. Optimization of Cutting Parameters in Turning Operation of EN24 Steel with Minimum Lubrication
  362. Experimental Study of Passive Cooling of a Building Using Long-Wave Night Sky Radiation in Owerri, Nigeria KY RADIATION IN OWERRI, NIGERIA
  363. Appraisal of Industrial Accidents and Their Effects on Profitability (A Case Study of Two Manufacturing Companies)
  364. Modeling And Evaluation Of A Passive Flat-Plate Solar Collector
  365. Experimental and Numerical Study of Multi Hole Extrusion Process: A Comparative Study
  366. Development of a Savonius Vertical Axis Wind Turbine
  367. PREDICTION AND OPTIMIZATION OF EN8 MILD STEEL MATERIAL
  368. The benefits of using solar energy as an alternative means of cheaper energy source.
  369. The Design and Fabrication of a used Polyethylene
  370. Performance Evaluation of Biomass Briquette from Elephant and Spear grass in Benin City, Edo State, Nigeria
  371. Performance Evaluation of a Developed Multipurpose Solar Dryer
  372. Pure Pursuit Algorithm and Autonomous Driving
  373. DEVELOPMENT OF A FLAT PLATE SOLAR STORE
  374. Performance Analysis of Locally Design Plastic Crushing
  375. Experimental Application of Strain Gauge Rosette and Determination of Principal Strains Using Mohr Circle
  376. EVALUATION-OF-COW-DUNG-AND-TALINUM-TRIANGULARE-AS-A-SEEDING-AGENT-FOR-THE-PRODUCTION-OF-BIOGAS-FROM-DOMESTIC-WASTES-IN-WARRI-METROPOLIS(1) – Copy
  377. Economic Potential and Benefits of Sawdust in Nigeria
  378. DESIGN OF IMPROVED CASSAVA PEELING MACHINE
  379. Design of a Multi-Purpose Crushing Machine for Processing of Food Grains in Nigeria
  380. Design and Development of Low Cost Groundnut Decorticating Machine for Home and Commercial Use in Nigeria
  381. Comparative Analysis of Yam Pounding Machine and the
  382. APPLICATION OF TAGUCHI APPROACH IN THE OPTIMIZATION OF THE MECHANICAL PROPERTIES OF SNAIL-SHELL-FILLER/CHICKEN-FEATHER-FIBRE POLYMER BASED HYBRID COMPOSITE
  383. Modular and 3D-Design of a Fluidised Bed Boiler with Agricultural Residue for Steam Energy Production
  384. DEVELOPMENT OF A CASSAVA MASH SIEVING MACHINE FOR GARI PROCESSING OPERATIONS
  385. Braking Pattern Impact on Brake Fade in an Automobile Brake System
  386. IMPROVEMENT AND CONSTRUCTION OF A PROTOTYPE OF AN INDUSTRIAL (S1 MODEL) POULTRY FEED MIXING MACHINE
  387. DESIGN OF SIX-STROKE INTERNAL COMBUSTION SPARK IGNITION ENGINE
  388. Use of an exergetic approach to analyze the performance of a vapor compression refrigeration system using a refrigerant solution of a nanoparticle (TiO2), mineral oil, and R410a (base refrige
  389. Generation of electrical power through Gas turbine.
  390. Effect of seawater corrosion on medium Carbon steel 0.34%C and 0.36%C
  391. Renewable Energy in Nigeria: A Review
  392. Modification of Palm Kernel Cracking and Separating Machine
  393. Prediction of the penetrated rust into the microcracks of concrete caused by reinforcement corrosion
  394. Application of nonlocal beam models to double-walled carbon nanotubes under a moving nanoparticle. Part II: parametric study
  395. Application of nonlocal beam models to double-walled carbon nanotubes under a moving nanoparticle, Part I, theoretical formulations
  396. Free longitudinal vibration of tapered nanowires in the context of nonlocal continuum theory via a perturbation technique
  397. A meshless approach for free transverse vibration of embedded single-walled nanotubes with arbitrary boundary conditions accounting for nonlocal effect
  398. Assessing dynamic response of multispan viscoelastic thin beams under a moving mass via generalized moving least square method
  399. Assessment of nanotube structures under a moving nanoparticle using nonlocal beam theories
  400. Longitudinal and transverse vibration of a single-walled carbon nanotube subjected to a moving nanoparticle accounting for both nonlocal and inertial effects
  401. Prediction capabilities of classical and shear deformable beam models excited by a moving mass
  402. Analytical Modeling and Optimization of a Solar Chimney Power Plant
  403. Robotics: Kinematics and Mathematical Foundations (Lesson Note)
  404. DESIGN AND CONSTRUCTION OF A MELON DEHUSKING MACHINE
  405. Energy conservation from systematic tire pressure regulation
  406. 3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development
  407. Evaluation of the dangers of corrosion in marine piping system using carbon steel c-1040.
  408. Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
  409. 3-D Printing Solar Photovoltaic Racking in Developing World
  410. Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
  411. Open source laboratory sample rotator mixer and shaker
  412. Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing
  413. Slicer and Process Improvements for Open¬source GMAW ¬based Metal 3¬D Printing
  414. Design, Modelling and Fabrication of a Portable Solar Powered Suction Pump
  415. Analysis of Longitudinal Aerodynamic Characteristics of an Aircraft M
  416. Inhibition of corrosion on AISI 4137 steel in H2SO4 using Cascabela thevetia and Jatropha curcas leaves
  417. Dynamic Behavior of Brushless DC Motor under the Application of PI, PD, PID, and Fuzzy Logic Controllers
  418. Design and costruction of bicycle ergometer
  419. Design and Construction of a Model Power Generating Windmill
  420. Statistical model to predict dry sliding wear behaviour of Aluminium-Jute bast ash particulate composite produced by stir-casting
  421. Design of Next Generation Civil and Military Aircraft with Ultra-High Bypass Engine using Composites, Advanced Materials and Technology
  422. Design of Effective Solid Waste Management System: A Case Study of Ifite-Awka zone, Anambra State
  423. Performance Assessment of the Firefighting Personal Protective Tunic
  424. Design and Construction of a GSM-Controlled Pick and Place Robot
  425. THE DEVELOPMENT OF A LARGE-SCALE MULTIPURPOSE HOT MEAL PROCESSING EQUIPMENT
  426. Development of Laboratory Hot Compression Mounting Press Machine
  427. DESIGN AND CONSTRUCTION OF ICU/REHABILITATION ADJUSTABLE BED USING LOCALLY SOURCED MATERIALS
  428. DESIGN & CONSTRUCTION OF HAMMER MILL MACHINE
  429. BASIC LUBRICATION PRINCIPLE
  430. DESIGN OF 2TONNES AUTOMATED HYDRAULIC JACK
  431. SUSTAINABLE E-LEARNING FOR NIGERIAN EDUCATIONAL DEVELOPMENT
  432. Energetic and Exergetic analysis of waste heat recovery system in sulphur acid using organic Rankine cycle.
  433. DESIGN AND CONSTRUCTION OF A SELF FEEDING CASSAVA GRATING MACHINE
  434. MACHINE COMPONENT DESIGN
  435. ENGINEERING DRAWING IN TERMS OF COMMUNICATION
  436. DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V
  437. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT
  438. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER
  439. THE CONSTRUCTION OF INDUSTRIAL FAN FOR WORKSHOP USE
  440. THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING
  441. CONSTRUCTION OF AN INTRUDER ALARM SYSTEM
  442. DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM
  443. DESIGN AND IMPLEMENTATION OF SIMPLE SCIENTIFIC CALCULATOR.
  444. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER IN THE MECHANICAL ENGINEERING DEPARTMENT
  445. DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM
  446. CONSTRUCTION OF AN INTRUDER ALARM SYSTEM
  447. THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING
  448. THE CONSTRUCTION OF INDUSTRIAL FAN FOR WORKSHOP USE
  449. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER
  450. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT
  451. DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V
  452. ENGINEERING DRAWING IN TERMS OF COMMUNICATION
  453. MACHINE COMPONENT DESIGN
  454. MACHINE TOOL CONTROL
  455. Technical report on the fabrication of a fan blade
  456. Advanced Fine Finishing Process
  457. DESIGN AND IMPLEMENTATION OF COMPUTER BASED LOTTERY PROCESSING SYSTEM
  458. DESIGN AND IMPLEMENTATION OF AN AUTOMATED MOTOR VEHICLE DRIVER’S LICENSING SYSTEM. (A CASE STUDY OF ENUGU MOTOR LICENSE OFFICE, ENUGU STATE; ABAKPA) NIKE).
  459. DESIGN AND IMPLEMENTATION OF AN ON-LINE VOTING SYSTEM (A CASE STUDY OF ENSIEC ENUGU)
  460. DESIGN AND IMPLEMENTATION OF A COMPUTERIZED MODERN POULTRY FARM A CASE STUDY IMO POULTRY FARM LTD
  461. CONSTRUCTION OF A Model SHELL AND TUBE HEAT EXCHANGER
  462. PROJECT REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
  463. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T.), ENUGU
  464. FABRICATION OF A METALLIC BOOKSHELF
  465. DESIGN AND IMPLEMENTATION OF COMPUTERIZED STOCK STOCK MARKETING REPORT REPORT (A CASE STUDY OF NIGERIA STOCK EXCHANHE COMMISSION)
  466. DESIGN AND IMPLEMENTATION OF COMPUTERIZED BUDGET ANALYSIS SYSTEM (CASE STUDY OF ENUGU STATE MINISTRY OF FINANCE)
  467. DESIGN AND IMPLEMENTATION OF A COMPUTERIZED FINANCIAL ACCOUNTING SYSTEM FOR A HOTEL INDUSTRY (A CASE STUDY OF MODOTEL HOTEL, OKPARA AVENUE ENUGU)
  468. CONSTRUCTION OF STEEL CUPBOARD
  469. THE DESIGN AND FABRICATION OF A PRESSURIZED KEROSENE OVEN (60 X 90)
  470. SELECTION OF WATER PUMPS
  471. FABRICATION OF THE A METALLIC BOOKSHELF
  472. NYLON CUTTING AND SEALING MACHINE
  473. THE PRODUCTION OF BENCH SHEARING MACHINES
  474. THE DESIGN AND FABRICATION OF PRESSURIZED KEROSENE STOVE
  475. THE DESIGN AND FABRICATION OF A PRESSURIZED KEROSENE OVEN (60 X 90)
  476. Design and Fabrication of an Ice Block Making Machine
  477. Design and Performance Evaluation of an Ice Block Making Machine
  478. Design And Construction Of A Car Door Using Fibre Reinforced Plastic Composite
  479. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER IN THE MECHANICAL ENGINEERING DEPARTMENT
  480. DESIGN AND IMPLEMENTATION OF SIMPLE SCIENTIFIC CALCULATOR.
  481. DESIGN AND FABRICATION OF AN ELECTRIC STOVE / OVEN
  482. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE AT INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT) ENUGU
  483. DESIGN AND FABRICATION OF WOOD LATHE MACHINE
  484. PRINTING IMAGES AND THEIR METHODS OF PRODUCTION
  485. PLANT MAINTENANCE AND SERVICES
  486. BASIC REFRIGERATION & AIR CONDITIONING TECHNOLOGY
  487. Design And Construction Of A Car Door Using Fibre Reinforced Plastic Composite
  488. Design and Performance Evaluation of an Ice Block Making Machine
  489. Design and Fabrication of an Ice Block Making Machine
  490. THE DESIGN AND FABRICATION OF A PRESSURIZED KEROSENE OVEN (60 X 90)
  491. THE DESIGN AND FABRICATION OF PRESSURIZED KEROSENE STOVE
  492. THE PRODUCTION OF BENCH SHEARING MACHINES
  493. NYLON CUTTING AND SEALING MACHINE
  494. FABRICATION OF THE A METALLIC BOOKSHELF
  495. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
  496. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  497. M DESIGN AND FABRICATION OF MOBILE DEEP FREEZER
  498. DESIGN AND CONSTRUCTION OF MOTORISED WHEEL BARROW
  499. CONSTRUCTION OF INDUSTRIAL WHEEL BARROW
  500. Design And Construction Of Metallic Bookshelf
  501. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
  502. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER
  503. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER
  504. DESIGN AND CONSTRUCTION OF MOTORISED WHEEL BARROW
  505. CONSTRUCTION OF CAR TOUCH INTRUDER ALARM
  506. DESIGN AND CONSTRUCTION OF A 2000W INVERTER
  507. DESIGN AND CONSTRUCTION OF SLAB FOR WATER RESERVOIR
  508. Design and Construction of a Motorised Wheel Barrow
  509. Design of mechanical convertable creeper
  510. Students Industrial Work Experience Scheme in Nigeria Railway Corporation Enugu.
  511. Secondary treatment of pm
  512. DESIGN AND CONSTRUCTION OF A METAL DETECTOR
  513. THE DESIGN AND FABRICATION OF A CORN SHELLING MACHINE
  514. DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE
  515. AN ELECTRIC POP-CORN MACHINE
  516. BENCH SHAPING MACHINE
  517. CONSTRUCTION OF A MOBILE REFRIGERATOR
  518. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS
  519. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  520. DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF
  521. FABRICATION OF THE A METALLIC BOOKSHELF
  522. FABRICATION OF A STANDARD WHEELBARROW
  523. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR
  524. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
  525. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
  526. Report on Construction of Nylon Sealing and Cutting Machine.
  527. THE CONSTRUCTION AND FABRICATION OF BENCH SHEARING MACHINE
  528. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
  529. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
  530. Development of Autonomous Lawn Mower from Locally Sourced Materials
  531. DEVELOPMENT OF A SOLAR POWERED CAR
  532. Design and fabrication of a PET (Polyethylene terephthalate) crushing machine.
  533. Maintenance, supervision and inspection at a water treatment plant.
  534. Design and Fabrication of journal Bearing Testing Rig
  535. A Model for Economic Production in Manufacturing Industries Under Unstable Power Supply.
  536. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF FLOW-ACCELERATED CORROSION DOWNSTREAM ORIFICES
  537. Energy Audit, Optimisation and Management of Liquified Natural Gas Plants With Renewable Energy Resources Around the Plant: A Case Study of Brass LNG Limited, Brass Island, Nigeria
  538. Water Based Metalworking Fluids: Proper Mixing Practices
  539. NDT Penetrant testing of welding seam carbon steel pipe
  540. A TERM PAPER ON DIRECT ENERGY CONVERTING DEVICES AND SYSTEMS
  541. EVALUATION OF MECHANICAL PROPERTIES OF ALUMINIUM ALLOY REINFORCED WITH RICE HUSK ASH AND GRAPHENE HYBRID METAL MATRIX COMPOSITE
  542. A HYBRID HISTOGRAM IN-MOTION MAPPING MODEL FOR AUTONOMOUS MOBILE ROBOT NAVIGATION AND OBSTACLE AVOIDANCE
  543. VELOCITY HEAT CONDUCTIVITY (VHC) MODEL FOR TWO AUTONOMOUS MOBILE ROBOTS IN ENERGY WORKSPACE
  544. A Virtual Force Vibration Concept for four Resonances Autonomous Mobile Robot Navigation
  545. A VIRTUAL THERMODYNAMIC TEMPERATURE CONCEPT IN 2D OBSTACLE ENVIRONMENT FOR AUTONOMOUS MOBILE ROBOT
  546. Design of a Food Noodles Extrusion Machine.
  547. DESIGN AND CONSTRUCTION OF SLAB FOR WATER RESERVOIR
  548. DESIGN AND CONSTRUCTION OF A 2000W INVERTER
  549. CONSTRUCTION OF CAR TOUCH INTRUDER ALARM
  550. DESIGN AND CONSTRUCTION OF MOTORISED WHEEL BARROW
  551. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER
  552. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER
  553. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
  554. Design And Construction Of Metallic Bookshelf
  555. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
  556. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
  557. THE CONSTRUCTION AND FABRICATION OF BENCH SHEARING MACHINE
  558. Report on Construction of Nylon Sealing and Cutting Machine.
  559. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
  560. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
  561. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR
  562. FABRICATION OF A STANDARD WHEELBARROW
  563. FABRICATION OF THE A METALLIC BOOKSHELF
  564. DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF
  565. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  566. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS
  567. CONSTRUCTION OF A MOBILE REFRIGERATOR
  568. BENCH SHAPING MACHINE
  569. AN ELECTRIC POP-CORN MACHINE
  570. DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE
  571. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE
  572. CONSTRUCTION OF GRAIN GRINDING MACHINE
  573. THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE
  574. THE FABRICATION FOR A SET OF SIEVES AND SAKER